Hydro System

Hydro Corrugated Knife Cutterhead

◉ Used for 4 side Moulder.
◉ For profile cutting & finish cutting.
◉ The Hydro System makes knives highly concentric for super fine cutting (350 bar).
◉ Tough structure to prevent deformation.
◉ 12° for hard wood, 20° for soft wood & 12° & 20° for general profile cutting.

Hydro Spiral Cutterhead

◉ Used for 4 side moulder.
◉ For rough planing and heavy planing.
◉ The Hydro System makes knives highly concentric for super fine cutting (350 bar).
◉ High quality & high precision.
◉ High feeding speed with low noise & preventing tear-out.
◉ 4-edge TCT Insert Knife gives most durability and lower-cost.
◉ Easily replace knives.

Hydro Aluminum Alloy Spiral Cutterhead

◉ Used for 4 side moulder.
◉ For rough planing and heavy planing.
◉ The Hydro System makes knives highly concentric for super fine cutting (350 bar).
◉ The light weight body can reduce load of machine.
◉ High quality & high precision.
◉ High feeding speed with low noise & preventing tear-out.
◉ 4-edge TCT Insert Knife gives most durability and lower-cost.
◉ Easily replace knives.

Hydro Planing Cutter Head

◉ Used for 4 Side Moulder.
◉ For finish cutting.
◉ The Hydro System makes knives highly concentric for super fine cutting (350 bar).
◉ Tough structure to prevent deformation.
◉ High quality & high precision.

Hydro Sleeve

◉ Used for 4 Side Moulder, Tenoner and Finger Joint Machine.
◉ To achieve more concentric when cutterhead working.
◉ For old & smaller spindle using, reducing the tolerance between the bore & diameter.
◉ For adapting different dimension between bore of cutterhead & spindle.
◉ High quality & high precision.

Hydro Quick-Replace Cutter Head

◉ Used for 4 Side Moulder.
◉ For finish cutting.
◉ Hydro system can eliminate the tolerance between bore and spindle achieving high precision cutting.
◉ Tiny corrugated knife used (Width:14 mm, Thickness 2.5 mm). The HSS or TCT knife are available.
◉ Since the special design of wedge and knife hook, Hydro Quick-Replace Cutterhead can extremely quick and effortless replace knives; greatly saving lose time.

Hydro Aluminum Alloy Corrugated Knife Planing Cutter Head

◉ Used for 4 Side Moulder.
◉ For finish cutting.
◉ The Hydro System makes knives highly concentric for super fine cutting (350 bar).
◉ The Light weight body can reduce load of machine.
◉ Corrugated knife used.
◉ Quickly replacing knives reduce time loss.
◉ Tough structure to prevent deformation.
◉ High quality & high precision.